deguns.net          has a Shopper Approved rating of            5/5       based on 25 ratings and reviews        
Home > Shop by Department > PARTS > AR 15 > GASS BLOCKS
Sort By:
Page of 1
Aero Precision .750 Low Profile Gas Block

Features:

  • Fits barrels with .750 OD
  • Low profile for easy fitment
  • Steel Set Screws 10-32x3/16 Knurled Cup Point
  • Made in the USA
  • Roll Pin Not Included

Our Price: $29.99
7 in stock!
Wilson Combat Carbine Length Adjustable AR-15 Gas Block .750"

The Wilson Combat Adjustable AR Gas Block replaces a
standard AR gas block and allows you to tune your direct impingement
rifle's gas system for smoother cycling and enhanced reliability.
Adjusting your rifle's gas port will lower or increase your bolt's
cyclic rate and tailors your rifle's performance to your unique needs.
This adjustable gas block is useful on match rifles, suppressed rifles
and rifles chambered in non-standard AR calibers especially when
shooting a variety of factory and custom hand-loaded ammunition. A
simple adjustment of the locking hex screw at the front of the block
lets you control the gas volume so you can tune your rifle's function to
your favorite loads. The Wilson Combat Adjustable AR Gas Block is
Chromemoly steel with a Melonite finish that will easily hold up to high
round count shooting and attaches to your barrel with dual set screws.
It is compatible with all standard USGI pattern AR rifles and DPMS
pattern LR-308 .308 AR recievers that take standard length gas tubes.
Lo-Profile gas block requires 1.45" internal clearance to fit under
rails. The package includes: adjustable gas block, adjustment set screw
installed, straight gas tube installed with gas tube pin installed, 12"
long Allen Wrench to adjust inside handguard.

Our Price: $99.99
6 in stock!
POF-USA Dictator AR-15 Adjustable Gas Block with Pistol Length Gas Tube

This 9 position adjustable DI gas block from POF USA provides the ultimate range of adjustability and versatility. Perfect for use with suppressors, this gas block allows you to control the rate of fire and gas flow into your DI AR-15 pistol.

A low-profile gas block, the Dictator fits nicely under rail systems with a rail channel of 1/2" or greater. Adjusting the gas tube is easy, the front of the gas block has a dial that accepts a flat screwdriver, the included dictation tool, or a 3/32" hex wrench.

Features a straight gas tube to eliminate heat build up. Comes compete with a pistol length gas tube.

UPC: 847313008619

Our Price: $169.99
4 in stock!
Wilson Combat MidLength Adjustable Gas Block .750"

The Wilson Combat Adjustable AR Gas Block replaces a
standard AR gas block and allows you to tune your direct impingement
rifle's gas system for smoother cycling and enhanced reliability.
Adjusting your rifle's gas port will lower or increase your bolt's
cyclic rate and tailors your rifle's performance to your unique needs.
This adjustable gas block is useful on match rifles, suppressed rifles
and rifles chambered in non-standard AR calibers especially when
shooting a variety of factory and custom hand-loaded ammunition. A
simple adjustment of the locking hex screw at the front of the block
lets you control the gas volume so you can tune your rifle's function to
your favorite loads. The Wilson Combat Adjustable AR Gas Block is
Chromoly steel with a Melonite finish that will easily hold up to high
round count shooting and attaches to your barrel with dual set screws.
It is compatible with all standard USGI pattern AR rifles and DPMS
pattern LR-308 .308 AR recievers that take standard length gas tubes.
Lo-Profile gas block requires 1.45" internal clearance to fit under
rails. The package includes: adjustable gas block, adjustment set screw
installed, straight gas tube installed with gas tube pin installed, 12"
long Allen Wrench to adjust inside handguard.

Our Price: $99.99
2 in stock!
Wilson Combat Carbine Length Adjustable AR-15 Gas Block .935"

The Wilson Combat Adjustable AR Gas Block replaces a
standard AR gas block and allows you to tune your direct impingement
rifle's gas system for smoother cycling and enhanced reliability.
Adjusting your rifle's gas port will lower or increase your bolt's
cyclic rate and tailors your rifle's performance to your unique needs.
This adjustable gas block is useful on match rifles, suppressed rifles
and rifles chambered in non-standard AR calibers especially when
shooting a variety of factory and custom hand-loaded ammunition. A
simple adjustment of the locking hex screw at the front of the block
lets you control the gas volume so you can tune your rifle's function to
your favorite loads. The Wilson Combat Adjustable AR Gas Block is
Chromemoly steel with a Melonite finish that will easily hold up to high
round count shooting and attaches to your barrel with dual set screws.
It is compatible with all standard USGI pattern AR rifles and DPMS
pattern LR-308 .308 AR recievers that take standard length gas tubes.
Lo-Profile gas block requires 1.45" internal clearance to fit under
rails. The package includes: adjustable gas block, adjustment set screw
installed, straight gas tube installed with gas tube pin installed, 12"
long Allen Wrench to adjust inside handguard.

Our Price: $99.99
1 in stock!
Diamondhead USA AR-15 Low profile Gas Block .750"

Diamondhead USA, Inc., Low Profile Gas Block, 556NATO, .750", Fits AR-15, Black

Our Price: $34.99
(Out of Stock)
Spike's Tactical Enhanced Adjustable Micro Gas Block .750 Spike's Tactical Enhanced Adjustable Micro Gas Block .750

The Spike's Tactical Enhanced adjustable gas block allows you to tune your rifle to the particular ammo load you use, or for buffer weight. Tuning your gas system decreases the amount of recoil felt. The less recoil you feel the faster you can get your sights back on target. Sights back on target faster equals faster follow up shots. The Spike's Tactical Enhanced Adjustable Gas Block is adjustable from the front of the block, the adjustment mechanism is made up of a set screw and detent locking mechanism. The set screw controls the volume of gas that is directed to the BCG. The adjustment mechanism allows for repeated adjustment while in the field. The operation of the Spike's Tactical Enhanced Adjustable Gas Block is simple, depress the locking detent and turn the set screw clock-wise (screw it in) to decrease the gas flow to the BCG, and turn the set screw counter clock-wise (un-screw it) to increase the gas flow to the BCG. To turn the gas flow adjustment set screw the locking detent must be pressed in, it will not turn without pressing it in manually.

Our Price: $119.99
(Out of Stock)
Midwest Industries Low Profile Gas Block

Low profile gas block for AR-15 pattern rifles. Made in the USA by Midwest Industries.

Our Price: $45.00
(Out of Stock)
Seekins Low Profile Adjustable AR-15 Gas Block .750 Diameter

Adjustable low profile gas block, .750 diameter, black finish by Seekins Precision for AR-15 style rifles.

Our Price: $59.99
(Out of Stock)