The Dual Fuel Scout Light® Pro unites the combat-proven elements of the M600DF Scout Light®. SureFire’s new Low-Profile Mount (LPM) delivers unprecedented versatility, allowing the user to optimize the light’s position relative to the rail. Rugged and reliable, the LPM easily and securely attaches to any MIL-STD-1913 or M-LOK rail.
The Dual Fuel’s recoil-proof, ultra-high-output LED delivers 1,200 lumens of blinding white light with 123A batteries or 1,500 lumens of light with the SF18650B* rechargeable lithium-ion battery, and its Total Internal Reflection (TIR) lens shapes the beam for plenty of reach and ample surround light. It’s ideal for close- to longer-range applications. Constructed of lightweight aerospace aluminum, Mil-Spec hard-anodized and O-ring sealed to keep out the elements, the Dual Fuel Scout Light Pro is a new twist on a legendary WeaponLight system.
The dual fuel light can be powered by an SF18650B lithium-ion rechargeable battery or two 123A lithium batteries
Generates up to 1,500 lumens of TIR-focused light with included SF18650B or 1,200 lumens with 123A batteries
Versatile Low-Profile Mount (LPM) allows the user to optimize the light’s position relative to the rail
Virtually indestructible ultra-high-output LED
TIR lens shapes versatile beam with enough reach and surround light for close-to longer-range operations
Mil-Spec hard-anodized aluminum body and tempered window make it light rugged, durable and combat ready
O-ring seals keep out moisture
Activation via Z68 momentary/constant-on pushbutton switching with protective shroud
Mounts for MIL-STD-1913 rails and M-LOK rails included
Use a clean, dry cloth to wipe off body and window. Periodically clean and lubricate threads. Apply a thin coat of non-migrating, silicon-based lubricant to O-rings (do not use petroleum-based lubricants which can harm O-rings). For additional tips on maintaining your SureFire illumination tool, visit www.surefire.com/faqs-maintenance.
SureFire makes a full line of accessories for most of its illumination tools. For a complete listing, visit www.surefire.com/partsaccessories.
18300 MT. BALDY CIRCLE, FOUNTAIN VALLEY, CA 92708-6122 SUREFIRE.COM
We’ll do what it takes to keep your SureFire gear running smoothly. SureFire warrants that if you — our customer — purchase one of our products, and we determine that it is defective in material and/or workmanship during your lifetime, we will repair or replace it — no hassle!
Our warranty does not cover consumables or normal wear-and-tear — things like batteries draining, headbands and headpads wearing out, ink cartridges running out, and switches wearing out — or damage resulting from abuse, alterations, unauthorized repairs, or use contrary to SureFire’s user manuals.
Should you need a replacement product, SureFire reserves the right to replace an obsolete product with a current production, like model. In the event that any issue with a SureFire product is not covered under this warranty SureFire can arrange to have the product repaired for a reasonable fee.
Except as specified above or prohibited by applicable law: all express or implied conditions and warranties, including, without limitation, any implied warranty or condition of merchantability or fitness for a particular purpose, or accuracy of any informational content, are hereby excluded and disclaimed by SureFire; and in no event will SureFire be liable for any special, direct, indirect, consequential, incidental or punitive damages howsoever arising and regardless of the theory of liability, even if advised of the possibility of such damages. Products, prices, availability, specifications, and offers are subject to change or cancellation at any time without notice.
M-MLOK-S: See Magpul instructions enclosed
M-1913-S: Use a flathead screwdriver to tighten or loosen mount screw
1. Remove the LED head by unscrewing it counterclockwise and remove depleted battery(ies)
2. Insert fresh battery(ies) with the positive (+) terminal(s) facing forward toward the head
WARNING: Do not mix depleted batteries with new batteries
3. Screw LED head clockwise until hand tight
ST07: Press pressure pad for momentary-on
SR07: Press pressure pad for momentary-on; depress pushbutton until
it clicks for constant-on
SR07-D-IT: Press pressure pad with bump to activate Weapon Light; Press pressure pad without bump to activate auxiliary device
Z68: Partially depress pushbutton tailcap switch for momentary light. For constant light, fully depress pushbutton tailcap switch until it clicks on
UE: Requires remote tape switch
DS Style: Partially depress pushbutton tailcap switch or press the pressure tape switch for momentary light. For constant light, fully depress pushbutton tailcap switch until it clicks on. Remove plug by rotating and pulling plug outward. When pressure switch is detached, use socket cover to keep dust out
Rotate bezel selector ring clockwise to select white-light or counterclockwise to select infrared